eng-mssk: 2015

Wednesday, September 2, 2015

Cisco Alcatel BGP Example

Hi all , I just wanted to see how Alcatel-Lucent configuration looks like , so I integrated the image (sros-vm.qcow2) with GNS3 and lapped it up

Ports Configuration

configure card 1 card-type "iom3-xp-b"
configure card 1 mda 1 mda-type "m5-1gb-sfp-b"
configure card 1 mda 2 mda-type "m5-1gb-sfp-b"
admin save

Interfaces Configuration

configure port 1/1/1 no shutdown
configure router interface INTF1 address 192.168.15.5/24
configure router interface INTF1 port 1/1/1

configure port 1/1/2 no shutdown
configure router interface INTF2 address 192.168.25.5/24
configure router interface INTF2 port 1/1/2

configure router interface lo0 address 5.5.5.5/32
configure router interface "lo0" loopback

configure router interface lo1 address 172.16.55.5/32
configure router interface "lo1" loopback

IGP Configuration

configure router ospf router-id 5.5.5.5
configure router ospf area 0.0.0.0 interface "lo0"
exit
configure router ospf area 0.0.0.0 interface "INTF1"

configure port 1/1/1 ethernet mtu 1514

BGP Configuration

A:vRR# configure router bgp
A:vRR>config>router>bgp# info
----------------------------------------------
            group "eBGP"
                description "External-BGP"
                family ipv4
                type external
                neighbor 192.168.25.2
                    peer-as 2
                exit
            exit
            group "iBGP"
                description "Internal-BGP"
                family ipv4
        next-hop-self
                type internal
                peer-as 15
                neighbor 1.1.1.1
                    local-address 5.5.5.5
                exit
            exit
            no shutdown
----------------------------------------------
configure router autonomous-system 15

Static route
configure router static-route 0.0.0.0/0 next-hop 192.168.25.2

R1#sh ip bgp
BGP table version is 1, local router ID is 192.168.15.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
              x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found

     Network          Next Hop            Metric LocPrf Weight Path
*> i 0.0.0.0          192.168.25.2                  100      0 ?

----------------------

Configurations

A:vRR# configure router
A:vRR>config>router# info
----------------------------------------------
#--------------------------------------------------
echo "IP Configuration"
#--------------------------------------------------
        interface "INTF1"
            address 192.168.15.5/24
            port 1/1/1
            no shutdown
        exit
        interface "INTF2"
            address 192.168.25.5/24
            port 1/1/2
            no shutdown
        exit
        interface "lo0"
            address 5.5.5.5/32
            loopback
            no shutdown
        exit
        interface "lo1"
            address 172.16.55.5/32
            loopback
            no shutdown
        exit
        interface "system"
            no shutdown
        exit
        autonomous-system 15
        router-id 5.5.5.5
#--------------------------------------------------
echo "Static Route Configuration"
#--------------------------------------------------
        static-route 0.0.0.0/0 next-hop 192.168.25.2
#--------------------------------------------------
echo "OSPFv2 Configuration"
#--------------------------------------------------
        ospf 5.5.5.5
            area 0.0.0.0
                interface "INTF1"
                    no shutdown
                exit
                interface "lo0"
                    no shutdown
                exit
            exit
        exit
#--------------------------------------------------
echo "Policy Configuration"
#--------------------------------------------------
        policy-options
            begin
            prefix-list "default-only"
                prefix 0.0.0.0/0 exact
            exit
            policy-statement "default-originate"
                entry 10
                    from
                        protocol static
                        prefix-list "default-only"
                        family ipv4
                    exit
                    action accept
                    exit
                exit
                default-action next-policy
                exit
            exit
            commit
        exit
#--------------------------------------------------
echo "BGP Configuration"
#--------------------------------------------------
        bgp
            export "default-originate"
            group "eBGP"
                description "External-BGP"
                family ipv4
                type external
                neighbor 192.168.25.2
                    peer-as 2
                exit
            exit
            group "iBGP"
                description "Internal-BGP"
                family ipv4
                next-hop-self
                type internal
                export "default-originate"
                peer-as 15
                neighbor 1.1.1.1
                    local-address 5.5.5.5
                exit
            exit
            no shutdown
        exit
----------------------------------------------

A:vRR# show router bgp neighbor 1.1.1.1 advertised-routes
===============================================================================
BGP Router ID:5.5.5.5          AS:15          Local AS:15
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================
BGP IPv4 Routes
===============================================================================
Flag Network                                            LocalPref   MED
      Nexthop                                            Path-Id     Label
      As-Path
-------------------------------------------------------------------------------
?     0.0.0.0/0                                          100         None
      192.168.25.2                                       None        -
      No As-Path
-------------------------------------------------------------------------------
Routes : 1
===============================================================================

OTV Example

ASR1
hostname ASR1

otv site bridge-domain 1
otv site-identifier 0000.0000.0001

interface Loopback0
ip address 1.1.1.1 255.255.255.255

interface Overlay1
no ip address
otv join-interface GigabitEthernet1
otv use-adjacency-server 192.168.13.1 unicast-only
otv adjacency-server unicast-only
service instance 50 ethernet
encapsulation dot1q 100
bridge-domain 200

service instance 51 ethernet
encapsulation dot1q 101
bridge-domain 201

service instance 52 ethernet
encapsulation dot1q 33
bridge-domain 202

interface GigabitEthernet1
mtu 4470
ip address 192.168.13.1 255.255.255.0
negotiation auto

interface GigabitEthernet2
no ip address
negotiation auto
service instance 1 ethernet
encapsulation untagged
bridge-domain 1

service instance 50 ethernet
encapsulation dot1q 100
bridge-domain 200

service instance 51 ethernet
encapsulation dot1q 101
bridge-domain 201

service instance 52 ethernet
encapsulation dot1q 13
rewrite ingress tag translate 1-to-1 dot1q 33 symmetric
bridge-domain 202

router ospf 1
router-id 1.1.1.1
network 1.1.1.1 0.0.0.0 area 0
network 192.168.13.1 0.0.0.0 area 0

ASR2
hostname ASR2

otv site bridge-domain 1
otv site-identifier 0000.0000.0002

interface Loopback0
ip address 2.2.2.2 255.255.255.255

interface Overlay1
no ip address
otv join-interface GigabitEthernet1
otv use-adjacency-server 192.168.13.1 unicast-only
service instance 50 ethernet
encapsulation dot1q 100
bridge-domain 200

service instance 51 ethernet
encapsulation dot1q 101
bridge-domain 201

service instance 52 ethernet
encapsulation dot1q 33
bridge-domain 202

interface GigabitEthernet1
mtu 4470
ip address 192.168.23.2 255.255.255.0
negotiation auto

interface GigabitEthernet2
no ip address
negotiation auto
service instance 1 ethernet
encapsulation untagged
bridge-domain 1

service instance 50 ethernet
encapsulation dot1q 100
bridge-domain 200

service instance 51 ethernet
encapsulation dot1q 101
bridge-domain 201

service instance 52 ethernet
encapsulation dot1q 33
bridge-domain 202

router ospf 1
router-id 2.2.2.2
network 2.2.2.2 0.0.0.0 area 0
network 192.168.23.2 0.0.0.0 area 0

R1
interface Vlan100
ip address 192.168.100.11 255.255.255.0

interface Vlan101
ip address 192.168.101.11 255.255.255.0

interface Vlan13
ip address 192.168.133.1 255.255.255.0

interface FastEthernet1/0
switchport mode trunk

R2
interface Vlan100
ip address 192.168.100.12 255.255.255.0

interface Vlan101
ip address 192.168.101.12 255.255.255.0

interface Vlan33
ip address 192.168.133.3 255.255.255.0

interface FastEthernet1/0
switchport mode trunk

Outputs:

R1#ping 192.168.100.12

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.100.12, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 40/265/692 ms

R1#ping 192.168.101.12

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.101.12, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 20/115/272 ms

R1#ping 192.168.133.3 source vlan 13

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.133.3, timeout is 2 seconds:
Packet sent with a source address of 192.168.133.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 20/44/80 ms

ASR1# show otv
Overlay Interface Overlay1
VPN name                 : None
VPN ID                   : 1
State                    : UP
Fwd-capable              : Yes
Fwd-ready                : Yes
AED-Server               : Yes
Backup AED-Server        : No
AED Capable              : Yes
Join interface(s)        : GigabitEthernet1
Join IPv4 address        : 192.168.13.1
Tunnel interface(s)      : Tunnel0
Encapsulation format     : GRE/IPv4
Site Bridge-Domain       : 1
Capability               : Unicast-only
Is Adjacency Server      : Yes
Adj Server Configured    : Yes
Prim/Sec Adj Svr(s)      : 192.168.13.1

ASR1# show otv route vlan 100

Codes: BD - Bridge-Domain, AD - Admin-Distance,
       SI - Service Instance, * - Backup Route

OTV Unicast MAC Routing Table for Overlay1

Inst VLAN BD     MAC Address    AD    Owner Next Hops(s)
----------------------------------------------------------
0    100 200    c201.1ea0.0000 40    BD Eng Gi2:SI50
0    100 200    c202.1ce4.0000 50    ISIS   ASR2

2 unicast routes displayed in Overlay1

----------------------------------------------------------
2 Total Unicast Routes Displayed

ASR1# show otv route vlan 101

Codes: BD - Bridge-Domain, AD - Admin-Distance,
       SI - Service Instance, * - Backup Route

OTV Unicast MAC Routing Table for Overlay1

Inst VLAN BD     MAC Address    AD    Owner Next Hops(s)
----------------------------------------------------------
0    101 201    c201.1ea0.0000 40    BD Eng Gi2:SI51
0    101 201    c202.1ce4.0000 50    ISIS   ASR2

2 unicast routes displayed in Overlay1

----------------------------------------------------------
2 Total Unicast Routes Displayed

ASR1# show otv route vlan 13
Failed to find VLAN 13 in any Overlay

ASR1# show otv route vlan 33

Codes: BD - Bridge-Domain, AD - Admin-Distance,
       SI - Service Instance, * - Backup Route

OTV Unicast MAC Routing Table for Overlay1

Inst VLAN BD     MAC Address    AD    Owner Next Hops(s)
----------------------------------------------------------
0    33   202    c201.1ea0.0000 40    BD Eng Gi2:SI52
0    33   202    c202.1ce4.0000 50    ISIS   ASR2

2 unicast routes displayed in Overlay1

----------------------------------------------------------
2 Total Unicast Routes Displayed

ASR2#show otv route vlan 100

Codes: BD - Bridge-Domain, AD - Admin-Distance,
       SI - Service Instance, * - Backup Route

OTV Unicast MAC Routing Table for Overlay1

Inst VLAN BD     MAC Address    AD    Owner Next Hops(s)
----------------------------------------------------------
0    100 200    0000.0c07.ac0a 50    ISIS   ASR1
0    100 200    c201.1ea0.0000 50    ISIS   ASR1
0    100 200    c202.1ce4.0000 40    BD Eng Gi2:SI50

3 unicast routes displayed in Overlay1

----------------------------------------------------------
3 Total Unicast Routes Displayed

ASR2#show otv route vlan 101

Codes: BD - Bridge-Domain, AD - Admin-Distance,
       SI - Service Instance, * - Backup Route

OTV Unicast MAC Routing Table for Overlay1

Inst VLAN BD     MAC Address    AD    Owner Next Hops(s)
----------------------------------------------------------
0    101 201    c201.1ea0.0000 50    ISIS   ASR1
0    101 201    c202.1ce4.0000 40    BD Eng Gi2:SI51

2 unicast routes displayed in Overlay1

----------------------------------------------------------
2 Total Unicast Routes Displayed

ASR2#show otv route vlan 33

Codes: BD - Bridge-Domain, AD - Admin-Distance,
       SI - Service Instance, * - Backup Route

OTV Unicast MAC Routing Table for Overlay1

Inst VLAN BD     MAC Address    AD    Owner Next Hops(s)
----------------------------------------------------------
0    33   202    c201.1ea0.0000 50    ISIS   ASR1
0    33   202    c202.1ce4.0000 40    BD Eng Gi2:SI52

2 unicast routes displayed in Overlay1

----------------------------------------------------------
2 Total Unicast Routes Displayed

ASR1#show otv vlan
Key: SI - Service Instance, NA - Non AED, NFC - Not Forward Capable.

Overlay 1 VLAN Configuration Information
Inst VLAN BD   Auth ED              State                Site If(s)
0    33   202 *ASR1                active              Gi2:SI52
0    100 200 *ASR1                active              Gi2:SI50
0    101 201 *ASR1                active              Gi2:SI51
Total VLAN(s): 3

ASR2#show otv vlan
Key: SI - Service Instance, NA - Non AED, NFC - Not Forward Capable.

Overlay 1 VLAN Configuration Information
Inst VLAN BD   Auth ED              State                Site If(s)
0    33   202 *ASR2                active              Gi2:SI52
0    100 200 *ASR2                active              Gi2:SI50
0    101 201 *ASR2                active              Gi2:SI51
Total VLAN(s): 3

ip access-list extended CAPTURE
permit udp host 192.168.13.1 host 192.168.23.2 eq 8472
permit udp host 192.168.23.2 host 192.168.13.1 eq 8472

monitor capture 1 buffer circular access-list CAPTURE interface g1 both

ASR1#show monitor capture 1 buffer brief
-------------------------------------------------------------
#   size   timestamp     source             destination   protocol
-------------------------------------------------------------
   0 150    0.000000   192.168.13.1     -> 192.168.23.2     UDP
   1 1464    0.133040   192.168.23.2     -> 192.168.13.1     UDP
   2 110    0.907002   192.168.13.1     -> 192.168.23.2     UDP
   3 1464    1.300039   192.168.13.1     -> 192.168.23.2     UDP
   4 1464    4.041990   192.168.13.1     -> 192.168.23.2     UDP
   5 1464    7.110046   192.168.13.1     -> 192.168.23.2     UDP
   6 150    8.562019   192.168.13.1     -> 192.168.23.2     UDP
   7 110    9.149046   192.168.13.1     -> 192.168.23.2     UDP
   8 1464    9.670015   192.168.13.1     -> 192.168.23.2     UDP
   9 1464    9.773006   192.168.23.2     -> 192.168.13.1     UDP
10 1464   12.425032   192.168.13.1     -> 192.168.23.2     UDP
11 1464   15.151044   192.168.13.1     -> 192.168.23.2     UDP

Tuesday, July 28, 2015

GNS3 MPLS Xconnect

Setup Components

The setup mainly consists of GNS3 integrated with VmWare workstation that runs CSR1000v

Basic Configuration

CSR1

interface loopback0

ip address 1.1.1.1 255.255.255.255

interface GigabitEthernet1

no shutdown

ip address 192.168.12.1 255.255.255.0

mpls ip

interface GigabitEthernet2

no ip address

mpls label protocol ldp

mpls ldp router-id loopback 0 force

router ospf 1

router-id 1.1.1.1

network 1.1.1.1 0.0.0.0 area 0

network 192.168.12.1 0.0.0.0 area 0

CSR2

interface loopback0

ip address 3.3.3.3 255.255.255.255

interface GigabitEthernet1

no shutdown

ip address 192.168.23.3 255.255.255.0

mpls ip

interface GigabitEthernet2

no ip address

mpls label protocol ldp

mpls ldp router-id loopback 0 force

router ospf 1

router-id 3.3.3.3

network 3.3.3.3 0.0.0.0 area 0

network 192.168.23.3 0.0.0.0 area 0

CE1

interface FastEthernet1/1

switchport trunk encapsulation dot1q

switchport mode ttrunk

CE2

interface FastEthernet1/1

switchport trunk encapsulation dot1q

switchport mode ttrunk

Xconnect Configuration

Under the sub-interface

CSR1

interface GigabitEthernet2

no ip address

negotiation auto

interface GigabitEthernet2.15

encapsulation dot1Q 15

xconnect 3.3.3.3 15 encapsulation mpls

CSR2

interface GigabitEthernet2

no ip address

negotiation auto

interface GigabitEthernet2.15

encapsulation dot1Q 15

xconnect 1.1.1.1 15 encapsulation mpls

CE1

vlan 15

interface vlan 15

ip address 192.168.15.3 255.255.255.0

CE2

vlan 15

interface vlan 15

ip address 192.168.15.4 255.255.255.0

Verification

CSR1#show xconnect interface gigabitEthernet 2.15 detail

Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State

UP=Up DN=Down AD=Admin Down IA=Inactive

SB=Standby HS=Hot Standby RV=Recovering NH=No Hardware

XC ST Segment 1 S1 Segment 2 S2

------+---------------------------------+--+---------------------------------+--

UP pri ac Gi2.15:15(Eth VLAN) UP mpls 3.3.3.3:15 UP

Interworking: ethernet Local VC label 19

Remote VC label 19

CSR1#show xconnect interface gigabitEthernet 2.15 event-trace

Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State

UP=Up DN=Down AD=Admin Down IA=Inactive

SB=Standby HS=Hot Standby RV=Recovering NH=No Hardware

XC ST Segment 1 S1 Segment 2 S2

------+---------------------------------+--+---------------------------------+--

UP pri ac Gi2.15:15(Eth VLAN) UP mpls 3.3.3.3:15 UP

CE1#ping 192.168.15.4 source vlan 15

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 192.168.15.4, timeout is 2 seconds:

Packet sent with a source address of 192.168.15.3

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 28/49/104 ms

CSR1#sh l2vpn atom vc vcid 15 detail

pseudowire100001 is up, VC status is up PW type: Ethernet

Create time: 01:53:07, last status change time: 01:52:53

Last label FSM state change time: 01:52:49

Destination address: 3.3.3.3 VC ID: 15

Output interface: Gi1, imposed label stack {17 19}

Preferred path: not configured

Default path: active

Next hop: 192.168.12.2

Member of xconnect service Gi2.15-15, group right

Associated member Gi2.15 is up, status is up

Interworking type is Ethernet

Service id: 0x6b000001

Signaling protocol: LDP, peer 3.3.3.3:0 up

Targeted Hello: 1.1.1.1(LDP Id) -> 3.3.3.3, LDP is UP

Graceful restart: not configured and not enabled

Non stop routing: not configured and not enabled

PWid FEC (128), VC ID: 15

Status TLV support (local/remote) : enabled/supported

LDP route watch : enabled

Label/status state machine : established, LruRru

Local dataplane status received : No fault

BFD dataplane status received : Not sent

BFD peer monitor status received : No fault

Status received from access circuit : No fault

Status sent to access circuit : No fault

Status received from pseudowire i/f : No fault

Status sent to network peer : No fault

Status received from network peer : No fault

Adjacency status of remote peer : No fault

Sequencing: receive disabled, send disabled

Bindings

Parameter Local Remote

------------ ------------------------------ ------------------------------

Label 19 19

Group ID 0 0

Interface

MTU 1500 1500

Control word on (configured: autosense) on

PW type Ethernet Ethernet

VCCV CV type 0x02 0x02

LSPV [2] LSPV [2]

VCCV CC type 0x07 0x07

CW [1], RA [2], TTL [3] CW [1], RA [2], TTL [3]

Status TLV enabled supported

SSO Descriptor: 3.3.3.3/15, local label: 19

Dataplane:

SSM segment/switch IDs: 4102/4101 (used), PWID: 1

Rx Counters

58 input transit packets, 4925 bytes

1 drops, 0 seq err

Tx Counters

3444 output transit packets, 310987 bytes

0 drops

Under the pseudowire

Configuration

CSR1

interface pseudowire60

encapsulation mpls

neighbor 3.3.3.3 60

interface GigabitEthernet2

no ip address

negotiation auto

service instance 60 ethernet

encapsulation dot1q 60

l2vpn xconnect context XCONN1

member GigabitEthernet2 service-instance 60

member pseudowire60

CSR2

interface pseudowire60

encapsulation mpls

neighbor 1.1.1.1 60

interface GigabitEthernet2

no ip address

negotiation auto

service instance 60 ethernet

encapsulation dot1q 60

l2vpn xconnect context XCONN1

member GigabitEthernet2 service-instance 60

member pseudowire60

CE1

vlan 60

interface vlan 60

ip address 172.16.60.3 255.255.255.0

CE2

vlan 60

interface vlan 60

ip address 172.16.60.4 255.255.255.0

Verification

CSR1#sh xconnect interface gigabitEthernet 2 detail

Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State

UP=Up DN=Down AD=Admin Down IA=Inactive

SB=Standby HS=Hot Standby RV=Recovering NH=No Hardware

XC ST Segment 1 S1 Segment 2 S2

------+---------------------------------+--+---------------------------------+--

UP pri ac Gi2:60(Eth VLAN) UP mpls 3.3.3.3:60 UP

Interworking: ethernet Local VC label 21

Remote VC label 21

CSR1#sh xconnect interface gigabitEthernet 2 event-trace

Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State

UP=Up DN=Down AD=Admin Down IA=Inactive

SB=Standby HS=Hot Standby RV=Recovering NH=No Hardware

XC ST Segment 1 S1 Segment 2 S2

------+---------------------------------+--+---------------------------------+--

UP pri ac Gi2:60(Eth VLAN) UP mpls 3.3.3.3:60 UP

CE1#ping 172.16.60.4 source vlan 60

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 172.16.60.4, timeout is 2 seconds:

Packet sent with a source address of 172.16.60.3

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 48/99/152 ms

CSR1#sh l2vpn atom vc vcid 60 detail

pseudowire60 is up, VC status is up PW type: Ethernet

Create time: 00:57:37, last status change time: 00:57:17

Last label FSM state change time: 00:57:17

Destination address: 3.3.3.3 VC ID: 60

Output interface: Gi1, imposed label stack {17 21}

Preferred path: not configured

Default path: active

Next hop: 192.168.12.2

Member of xconnect service XCONN1

Associated member Gi2 is up, status is up

Interworking type is Ethernet

Service id: 0x66000002

Signaling protocol: LDP, peer 3.3.3.3:0 up

Targeted Hello: 1.1.1.1(LDP Id) -> 3.3.3.3, LDP is UP

Graceful restart: not configured and not enabled

Non stop routing: not configured and not enabled

PWid FEC (128), VC ID: 60

Status TLV support (local/remote) : enabled/supported

LDP route watch : enabled

Label/status state machine : established, LruRru

Local dataplane status received : No fault

BFD dataplane status received : Not sent

BFD peer monitor status received : No fault

Status received from access circuit : No fault

Status sent to access circuit : No fault

Status received from pseudowire i/f : No fault

Status sent to network peer : No fault

Status received from network peer : No fault

Adjacency status of remote peer : No fault

Sequencing: receive disabled, send disabled

Bindings

Parameter Local Remote

------------ ------------------------------ ------------------------------

Label 21 21

Group ID 0 0

Interface

MTU 1500 1500

Control word on (configured: autosense) on

PW type Ethernet Ethernet

VCCV CV type 0x02 0x02

LSPV [2] LSPV [2]

VCCV CC type 0x07 0x07

CW [1], RA [2], TTL [3] CW [1], RA [2], TTL [3]

Status TLV enabled supported

SSO Descriptor: 3.3.3.3/60, local label: 21

Dataplane:

SSM segment/switch IDs: 24592/12302 (used), PWID: 3

Rx Counters

24 input transit packets, 2381 bytes

0 drops, 0 seq err

Tx Counters

1740 output transit packets, 164359 bytes

0 drops